Cambium Networks PTP 850E, User Manual

Page: 193 / 560

Chapter 7: Quality of Service (QoS) Configuring Policers (Rate Metering)
phn-3963_008v000
Page 7-19
Assigning Unknown Multicast Policers
Unknown multicast packets are multicast packets with unknown destination MAC addresses. To assign a policer for
unknown multicast traffic to a logical interface:
1 Select
Ethernet > Interfaces > Logical Interfaces . The Logical Interfaces page opens ( Figure 118 ).
2 Select the interface in the Ethernet Logical Port Configuration table and click Policers . The Policers page opens.
By default, the Policers page opens to the Unicast Policer table ( Figure 133 ).
3 Select Unknown Multicast Policer . The Unknown Multicast Policer table appears.
Figure 109: Logical Interfaces – Policers Page – Unknown Multicast Policer
4 In the
Policer profile
field, select a profile from the policer profiles defined in the system. The
Policer profile
drop-down list includes the ID and description of all defined profiles.
5 In the Unknown multicast admin field, select Enable to enable policing on unknown multicast traffic flows
from the logical interface, or Disable to disable policing on unknown multicast traffic flows from the logical
interface.
6 Click Apply .
Assigning Broadcast Policers
To assign a policer for broadcast traffic to a logical interface:
1.
Select Ethernet > Interfaces > Logical Interfaces . The Logical Interfaces page opens ( Figure 118 ).
2. Select the interface in the Ethernet Logical Port Configuration table and click
Policers
. The Policers page
opens. By default, the Policers page opens to the Unicast Policer table ( Figure 133 ).
3. Select Broadcast Policer . The Broadcast Policer table appears.
Figure 110
Logical Interfaces – Policers Page – Broadcast Policer