Chapter 7: Quality of Service (QoS)
Configuring Policers (Rate Metering)
phn-3963_008v000
Page 7-18
Assigning Multicast Policers
To assign a policer for multicast traffic to a logical interface:
1 Select
Ethernet > Interfaces > Logical Interfaces
. The Logical Interfaces page opens (
2 Select the interface in the Ethernet Logical Port Configuration table and click
Policers
. The Policers page opens.
By default, the Policers page opens to the Unicast Policer table (
3 Select
Multicast Policer
. The Multicast Policer table appears.
Figure 108: Logical Interfaces – Policers Page – Multicast Policer
4 In the
Policer profile
field, select a profile from the policer profiles defined in the system. The
Policer profile
drop-down list includes the ID and description of all defined profiles.
5 In the
Multicast admin
field, select
Enable
to enable policing on multicast traffic flows from the logical
interface, or
Disable
to disable policing on multicast traffic flows from the logical interface.
6 Click
Apply
.