Cambium Networks PTP 820E, Installation Manual

Page: 12 / 110

Page 12 of 110
Disposal of Cambium equipment
European Union (EU) Directive 2002/96/EC Waste Electrical and Electronic Equipment (WEEE)
Do not dispose of Cambium equipment in landfill sites. For disposal instructions, refer to
http://www.cambiumnetworks.com/support .
Disposal of surplus packaging
Do not dispose of surplus packaging in landfill sites. In the EU, it is the individual recipient’s responsibility to
ensure that packaging materials are collected and recycled according to the requirements of EU environmental
law.
In non-EU countries
In non-EU countries, dispose of Cambium equipment and all surplus packaging in accordance with national and
regional regulations.
Pre-Installation Instructions
Packing
The equipment should be packed and sealed in moisture absorbing bags.
Transportation and Storage
The equipment cases are prepared for shipment by air, truck, railway and sea, suitable for handling by forklift
trucks and slings. The cargo must be kept dry during transportation, in accordance with ETS 300 019-1-2,
Class 2.3. For sea-transport, deck-side shipment is not permitted. Carrier-owned cargo containers should be
used.
It is recommended that the equipment be transported to the installation site in its original packing case.
If intermediate storage is required, the packed equipment must be stored in a dry and cool environment, and out
of direct sunlight, in accordance with ETS 300 019-1-1, Class 1.2.
Unpacking
The equipment is packed in sealed plastic bags and moisture absorbing bags are inserted. Any separate sensitive
product, i.e. printed boards, are packed in anti-static handling bags. The equipment is further packed in special
designed cases.
Marking is done according to standard practice unless otherwise specified by customers. The following details
should be marked:
• Customers address
•
Contract No
• Site name (if known)
• Case No