Cambium Networks PTP 820 Series, User Manual, Page: 939 / 1149

Chapter 20: Ethernet Protocols (CLI) Configuring MSTP (CLI)
phn-3965_006v002
Page 20-16
Table 266 BPDU Destination MAC Address CLI Parameters
Parameter Input Type Permitted Values Description
bpdu-
destination-
mac Variable customer
provider
customer
– The destination MAC address
of BPDUs is 0x0180-C200-0000. Provider
BPDUs are either tunneled or discarded.
provider – The destination MAC address
of BPDUs is 0x0180-C200-0008. Customer
BPDUs are either tunneled or discarded.
Freezing MSTP (CLI)
You can freeze MSTP in the unit. When MSTP is frozen, BPDUs are neither transmitted nor processed, and all port
states are maintained as they were before MSTP was frozen.
To freeze MSTP, enter the following command in root view:
root> ethernet mstp mstp-freeze
To unfreeze MSTP, enter the following command in root view:
root> ethernet mstp mstp-defreeze
To display whether MSTP is or is not currently frozen in the unit, enter the following command in root view:
root> ethernet mstp show-mstp-frozen
Resetting the MSTP Stack (CLI)
To reset MSTP on the unit, enter the following command in root view:
root> ethernet mstp mstp-reset
Handling Signal Degrade (SD) Failures (CLI)
Signal Degrade failures (SD) can either be ignored or treated the same as SF, which means an SD failure triggers a
topology change.
Note
This feature is planned for future release.
To determine how SD failures are treated, enter the following command in root view:
root> ethernet mstp set sd-handling <sd-handling>
Table 267 MSTP Signal Degrade Failure CLI Parameters