Cambium Networks PTP 820 Series, User Manual, Page: 927 / 1149

Chapter 20: Ethernet Protocols (CLI) Configuring G.8032 (CLI)
phn-3965_006v002
Page 20-4
Parameter Input Type Permitted Values Description
level Number 0-7 Optional. The Maintenance Entity Group
(MEG) level used for R-APS messages sent in
the ERPI.
version Number 1-2 Optional. The ERPI (G.8032) protocol
version currently being used in the unit.
erpi-name Text A descriptive name for the ERPI.
The following commands create a Ring ERPI with ID 1, and name the ERPI "service_x". This ERPI is associated with
Ethernet Service 1. The end points of the ERPI are Service Point 1 and Service Point 2. The ERPI is configured with
MEG level 2
root> ethernet g8032 create-erpi erp-type ring erpi-id 1 erpi-service-id
1 west-sp 1 east-sp 2 level 2
root> ethernet g8032 set-erpi-name erpi-id 1 erpi-name service_x
The following commands create a Sub-Ring ERPI with ID 10, and name the ERPI "Sub_ring". This ERPI is associated
with Ethernet Service 20. The end points of the ERPI are Service Point 1 and Service Point 2. The ERPI is configured
with MEG level 4
root> ethernet g8032 create-erpi erp-type sub-ring erpi-id 10 erpi-
service-id 20 west-sp 1 east-sp 2 level 4
root> ethernet g8032 set-erpi-name erpi-id 1 erpi-name Sub_ring
The following commands create a Ring with Sub-Ring ERPI with ID 20, and name the ERPI "RSRi". This ERPI is
associated with Ethernet Service 30. The end points of the ERPI are Service Point 1 and Service Point 2, and the
point of connection between the Ring and the Sub-Ring is Service Point 3. The ERPI is configured with MEG level 5
root> ethernet g8032 create-erpi erp-type ring-with-sub-ring erpi-id 20
erpi-service-id 30 west-sp 1 east-sp 2 sub-ring-sp 3 level 5
root> ethernet g8032 set-erpi-name erpi-id 1 erpi-name RSRi
The following command deletes ERPI 1:
root> ethernet g8032 delete-erpi erpi-id 1
Configuring the RPL Owner (CLI)
The RPL Owner Node is a node in the ERPI that is responsible for blocking traffic at one end of the ERPI.
To set the RPL Owner Node, enter the following command in root view:
root> ethernet g8032 set-rpl-owner erpi-id <erpi-id> SP <SP>
To remove the RPL Owner Node, enter the following command in root view:
root> ethernet g8032 remove-rpl-owner erpi-id <erpi-id>
Table 258 G.8032 RPL Owner CLI Parameters