Cambium Networks PTP 820 Series, User Manual, Page: 838 / 1149

Chapter 18: Ethernet Services and Interfaces (CLI) Configuring Ethernet Services (CLI)
phn-3965_006v002
Page 18-19
service[37]>sp broadcast set spid 1 state disable
CoS Preservation and Modification on a Service Point (CLI)
The CoS of frames traversing a service can be modified on the logical interface, service point, and service level. The
service point can override the CoS decision made at the interface level. The service, in turn, can modify the CoS
decision made at the service point level.
To determine whether the service point modifies CoS decisions made at the interface level, go to service view for
the service and enter the following command:
service[SID]> sp cos-mode set spid <sp-id> mode <cos mode>
Table 188 Service Point CoS Preservation CLI Parameters
Parameter Input Type Permitted Values Description
sp-id Number 1-32 for P2P and
MP services.
1-30 for MNG
services. The Service Point ID.
cos mode Variable sp-def-cos
interface-decision sp-def-cos – The service point re-defines the
CoS of frames that pass through the service point,
according to the Default CoS (below). This decision
can be overwritten on the service level.
interface-decision – The service point
preserves the CoS decision made at the interface
level. This decision can still be overwritten at the
service level.
If you set cos-mode to sp-def-cos, you must then configure a default CoS. This CoS is applied to frames that ingress
the service point, but can be overwritten at the service level.
To configure the default CoS, go to service view for the service and enter the following command:
service[SID]>sp sp-def-cos set spid <sp-id> cos <cos>
Table 189 Service Point Default CoS CLI Parameters
Parameter Input Type Permitted Values Description
sp-id Number
1-32 for P2P and
MP services.
1-30 for MNG
services.
The Service Point ID.
cos Number 0 – 7 If
cos-mode
is
sp-def-cos
, this is the CoS
assigned to frames that pass through the service
point. This decision can be overwritten on the
service level.