Cambium Networks PTP 820 Series, User Manual, Page: 833 / 1149

Chapter 18: Ethernet Services and Interfaces (CLI) Configuring Ethernet Services (CLI)
phn-3965_006v002
Page 18-14
To add a service point with an S-Tag interface type, go to service view for the service and enter the following
command:
service[SID]>sp add sp-type <sp-type> int-type s-tag spid <sp-id>
[interface|group] <interface|group> slot <slot> port <port> vlan <vlan>
sp-name <sp-name>
To add a service point with a Bundle-C interface type, go to service view for the service and enter the following
command:
service[SID]>sp add sp-type <sp-type> int-type bundle-c spid <sp-id>
[interface|group] <interface|group> slot <slot> port <port> sp-name <sp-
name>
To add a service point with a Bundle-S interface type, go to service view for the service and enter the following
command:
service[SID]>sp add sp-type <sp-type> int-type bundle-s spid <sp-id>
[interface|group] <interface|group> slot <slot> port <port> [outer-
vlan <outer-vlan>|vlan <vlan>] sp-name <sp-name>
Note
In SAP service points, use the parameter outer-vlan . In SP service points, use the parameter vlan .
To add a service point with a Q-in-Q interface type, go to service view for the service and enter the following
command:
service[SID]>sp add sp-type <sp-type> int-type qinq spid <sp-id>
[interface|group] <interface|group> slot <slot> port <port> outer-
vlan <outer-vlan> inner-vlan <inner-vlan> sp-name <sp-name>
To add a Pipe service point, go to service view for the service and enter the following command:
service[SID]>sp add sp-type pipe int-type <int-type> spid <sp-id>
[interface|group] <interface|group> slot <slot> port <port> sp-name <sp-
name>
Table 186 Add Service Point CLI Parameters
Parameter Input Type Permitted Values Description
sp-type Variable sap
snp
pipe
mng SAP – Service Access Point
SNP
– Service Network Point
PIPE
– Pipe service point
MNG
– Management service point