Cambium Networks PTP 820 Series, User Manual, Page: 635 / 1149

Chapter 11: Access Management and Security Configuring RADIUS
phn-3965_006v002
Page 11-31
Figure 383 Create Network Policy – Stopping/Starting NPS Services
Configuring a Linux FreeRADIUS Server
The following sub-sections describe how to configure a Linux FreeRADIUS server to work with PTP 820 device.
To so do, you will need to modify the following three files:
•
/etc/raddb/users
•
/etc/raddb/clients.conf
•
/usr/share/freeradius/dictionary.cambium
Step 1 – Creating Users
This step describes how to create the following three users:
•
u1 – with advanced read/write privileges, password 1111
•
u2 – with normal read/write privileges, password 2222
•
u3 – with no read/write privileges, password 3333
To create these RADIUS users:
1 Add the users in the
/etc/raddb/users
file, using any editor you like, according to the following example:
# user1 - advanced privileges
u1 auth-type := local, Cleartext-Password := "1111"
security-ro = advanced,
security-wo = advanced,