Cambium Networks PTP 820 Series, User Manual, Page: 608 / 1149

Chapter 11: Access Management and Security Configuring the Password Security Parameters
phn-3965_006v002
Page 11-4
Configuring the Password Security Parameters
To configure enhanced security requirements for user passwords:
1. Select Platform > Security > Access Control > Password Management . The Access Control Password
Management page opens.
Figure 357 Access Control Password Management Page
2. In the Enforce password strength field, select Yes or No . When Yes is selected:
o
Password length must be at least eight characters.
o
Password must include characters of at least three of the following character types: lower case letters,
upper case letters, digits, and special characters. For purposes of meeting this requirement, upper case
letters at the beginning of the password and digits at the end of the password are not counted.
o
A password cannot be repeated within five changes in password.
3. In the Password change for first login field, select Yes or No . When Yes is selected, the system requires the
user to change his or her password the first time the user logs in.
4. In the Password aging (Days) field, select the number of days that user passwords will remain valid from
the first time the user logs into the system. You can enter 20-90, or No Aging . If you select No Aging ,
password aging is disabled and passwords remain valid indefinitely.
5. Click Apply .