Cambium Networks PTP 820 Series, User Manual, Page: 495 / 1149

Chapter 8: Ethernet Protocols Configuring LLDP
phn-3965_006v002
Page 8-40
Figure 279 LLDP Port Configuration Page
2. Select an interface and click Edit . The LLDP Port Configuration - Edit page opens.
Figure 280 LLDP Port Configuration - Edit Page
3. In the Admin field, select from the following options to define how the LLDP protocol operates for this port:
o
TX Only – LLDP agent transmits LLDP frames on this port but does not update information about its peer.
o
RX Only – LLDP agent receives but does not transmit LLDP frames on this port.
o
TX and RX – LLDP agent transmits and receives LLDP frames on this port (default value).
o
Disabled – LLDP agent does not transmit or receive LLDP frames on this port.
4. In the Notification Enable field, select from the following options to define, on a per agent basis, whether
or not notifications from the agent to the NMS are enabled:
o
True – The agent sends a Topology Change trap to the NMS whenever the system information received
from the peer changes.