Cambium Networks PTP 820 Series, User Manual, Page: 488 / 1149

Chapter 8: Ethernet Protocols Configuring MSTP
phn-3965_006v002
Page 8-33
Note
Changing the value of this parameter is considered to be a topology change by the MSTP mechanism.
4 In the MSTI Port Path Cost field, select the port's Path Cost parameter value for the MSTI.
Note
Changing the value of this parameter may cause re-initialization of the MSTI for which the parameter
is changed. No other MSTI is affected.
5 Click Apply , then Close .
Table 83 lists and describes the status parameters in the MSTP MSTI Tree page.
Table 83 MSTP Port MSTI Status Parameters
Parameter Definition
MSTI Port MSTI ID The MSTI ID.
MSTI Port Interface Location The slot number and port number of the port.
MSTI Port State The port's current state for the MSTI. Possible values are:
•
Forwarding – The port sends and receives traffic normally.
•
Blocking – The port does not send or receive traffic, but does receive
BPDUs.
•
Learning – The port receives traffic but does not forward the traffic.
The port learns the source MAC addresses of incoming frames.
•
Listening – The port monitors BPDUs, but does not forward traffic
and does not learn the source MAC addresses of incoming frames.
•
Disabled – The port is disabled (not by MSTP).
MSTI Port Designated Root The Regional Root ID component of the port's Port Priority vector for the
MSTI.
MSTI Port Designated Cost
The Internal Root Path Cost component of the port's MSTI port priority
vector, for the MSTI.
MSTI Port Designated Bridge The Designated Bridge ID component of the port's MSTI port priority
vector.