Cambium Networks PTP 820 Series, User Manual, Page: 453 / 1149

Chapter 7: Quality of Service (QoS) Configuring Scheduling
phn-3965_006v002
Page 7-42
Figure 249 Scheduler WFQ Profile – Add Page
3. In the Profile ID field, select a unique Profile ID between 2 and 7. Profile ID 1 is used for a pre-defined WFQ
profile.
4. For each CoS value, enter the weight for that CoS, from 1 to 20.
5. Click Apply , then Close .
Editing a WFQ Priority Profile
To edit a scheduler WFQ profile:
1. Select Ethernet > QoS > Scheduler > WFQ Profiles . The Scheduler WFQ Profile page opens ( Figure 248 ).
2. Select the profile you want to edit and click Edit . The Scheduler WFQ Profile – Edit page opens. This page is
similar to the Scheduler WFQ Profile – Add page ( Figure 249 ). You can edit any parameter except the Profile
ID .
3. Modify the profile.
4. Click Apply , then Close .
Deleting a WFQ Profile
To delete a scheduler WFQ profile, select the profile in the Scheduler WFQ Profiles page ( Figure 248 ) and click
Delete . The profile is deleted.
To delete multiple scheduler WFQ profiles:
1. Select the profiles in the Scheduler WFQ Profiles page or select all the profiles by selecting the check box in
the top row.
2. Click Delete . The profiles are deleted.