Cambium Networks PTP 820 Series, User Manual, Page: 421 / 1149

Chapter 7: Quality of Service (QoS) Configuring Classification
phn-3965_006v002
Page 7-10
3. Modify the parameters you want to change:
o
802.1AD UP – Read-only. The User Priority (UP) bit to be mapped.
o
802.1ADQ DEI – Read-only. The DEI bit to be mapped.
o
802.1AD CoS – The CoS assigned to frames with the designated UP and DEI.
o
802.1AD Color – The Color assigned to frames with the designated UP and DEI.
4. Click Apply , then Close .
Modifying the DSCP Classification Table
You can configure the classification criteria for Differentiated Service Code Point (DSCP) priority values. The DSCP is
a 6-bit length field inside the IP datagram header carrying priority information. Classification by DSCP can be used
for untagged frames, as well as 802.1Q tagged or provider VLAN tagged frames.
To modify the classification criteria for DSCPs:
1. Select Ethernet > QoS > Classification > DSCP . The DSCP Classification page opens.
Figure 220 DSCP Classification Page
2. Select the row you want to modify and click Edit . The DSCP Classification - Edit page opens.