Cambium Networks PTP 820 Series, User Manual, Page: 384 / 1149

Chapter 6: Ethernet Services and Interfaces Configuring Ethernet Service(s)
phn-3965_006v002
Page 6-13
Parameter Definition
CoS Mode Indicates how the service point handles the CoS of frames that pass
through the service point. Options are:
•
sp-def-cos – The service point re-defines the CoS of frames that pass
through the service point, according to the Default CoS (below). This
decision can be overwritten on the service level.
•
Interface-Decision – The service point preserves the CoS decision
made at the interface level. The decision can still be overwritten at
the service level.
•
PCL – Reserved for future use.
•
TCAM – Reserved for future use.
Default CoS The default CoS. If the CoS Mode is sp-def-cos , this is the CoS assigned to
frames that pass through the service point. This decision can be
overwritten at the service level. Possible values are 0 to 7.
Split horizon group Reserved for future use.
c. Ethernet Service Points – Egress Attributes
Select Egress in the Ethernet Service Points page to display the Ethernet Service Points – Egress Attributes table.
Table 65 ` describes the parameters displayed in the General SP Attributes table.