Cambium Networks PTP 820 Series, User Manual, Page: 356 / 1149

Chapter 5: Radio Configuration Configuring and Viewing Radio PMs and Statistics
phn-3965_006v002
Page 5-42
Parameter Definition
TSL exceed threshold
seconds The number of seconds the measured TSL exceeded the threshold during
the interval. TSL thresholds are configured in the Radio Thresholds page.
See
Configuring BER Thresholdsand Displaying Current BER.
RSL exceed threshold1
seconds The number of seconds the measured RSL exceeded RSL threshold 1
during the interval. RSL thresholds are configured in the Radio Thresholds
page. See
Configuring BER Thresholdsand Displaying Current BER..
RSL exceed threshold2
seconds The number of seconds the measured RSL exceeded RSL threshold 2
during the interval. RSL thresholds are configured in the Radio Thresholds
page. See
Configuring BER Thresholdsand Displaying Current BER. .
Integrity Indicates whether the values received at the time and date of the
measured interval are reliable. An x in the column indicates that the
values are not reliable due to a possible power surge or power failure that
occurred at that time.
To set the Signal Level PM thresholds, click Thresholds . The Signal Level Thresholds Configuration – Edit Page
opens. Set the thresholds, described in Table 53 , and click Apply .
Figure 177 Signal level Thresholds Configuration – Edit Page
Table 53 Signal Level Thresholds
Parameter Definition
RX Level Threshold 1
(dBm) Specify the threshold for counting exceeded seconds if the RSL is below
this level.
RX Level Threshold 2
(dBm) Specify a second threshold for counting exceeded seconds if the RSL is
below this level.
TX Level Threshold (dBm) Specify the threshold for counting exceeded seconds if the TSL is below
this level.