Cambium Networks PTP 820 Series, User Manual, Page: 302 / 1149

Chapter 4: Unit Management Backing Up and Restoring Configurations
phn-3965_006v002
Page 4-27
1. Select Platform > Configuration > Backup Files . The Backup Files page opens. For a description of the
information provided in the Backup Files page, see Table 40 Backup Files Page Columns .
Figure 145 Backup Files Page
Table 40 Backup Files Page Columns
Parameter Definition
File number A number from 1 to 3 that identifies the restore point.
Original system type The type of unit from which the backup configuration file was created.
Software version
The software version of the unit from which the backup configuration file
was created.
Time of creation The time and date on which the configuration file was created.
Original IP address The IP address of the unit from which the configuration file was created.
System ID The System ID, if any, of the unit from which the configuration file was
created. This is taken from the
Name field in the Unit Parameters page.
See Configuring Unit Parameters .
Valid Reserved for future use.
Setting the Configuration Management Parameters
When importing and exporting configuration files, the PTP 820G/ F functions as an FTP or SFTP client. You must
install FTP or SFTP server software on the PC or laptop you are using to perform the import or export. For details,
see
Configuring the Internal Ports for FTP or SFTP
Installing and Configuring an FTP or SFTP Server.
Before importing or exporting a configuration file, you must perform the following steps: