Cambium Networks PTP 820 Series, User Manual, Page: 1078 / 1149

Chapter 27: Pin-Outs and LEDs – PTP 820G Ethernet Pin-Outs and LEDs – PTP 820G
phn-3965_006v002
Page 27-4
Ethernet Management Interface Pin-Outs
Table 332 Management Interface Pin-Out Diagram (MGMT)
RJ45 Pin no. Description
1 Port 1 – TX+
2 Port 1 – TX-
3 Port 1 – RX+
4 Port 2 – TX+
5 Port 2 – TX-
6 Port 1 – RX-
7 Port 2 – RX+
8 Port 2 – RX-
Ethernet Management Interface LEDs
The MGMT interface has the following LEDs:
•
Port Status LED – The LED for management interface 1 is located on the upper left of the MGMT interface. The
LED for management interface 2 is located on the upper right of the MGMT interface. Each LED indicates the
link status of the interface:
o
Off – The cable is not connected or the signal is lost.
o
Green – The interface is enabled and the link is operational.
o
Blinking Green – The interface is transmitting and/or receiving management traffic.