Cambium Networks PTP 820 Series, User Manual, Page: 1019 / 1149

Chapter 23: Access Management and Security (CLI) Configuring the Password Security Parameters (CLI)
phn-3965_006v002
Page 23-6
Table 307 Password Strength Enforcement CLI Parameters
Parameter Input Type Permitted Values Description
enforce-
strength Boolean Yes
no
When yes is selected:
•
Password length must be at least
eight characters.
•
Password must include characters
of at least three of the following
character types: lower case letters,
upper case letters, digits, and
special characters. For purposes of
meeting this requirement, upper
case letters at the beginning of the
password and digits at the end of
the password are not counted.
•
A password cannot be repeated
within five changes in password.
The following command enables password strength enforcement:
root> platform security access-control password enforce-strength set yes
Forcing Password Change Upon First Login (CLI)
To determine whether the system requires users to change their password the first time they log into the system,
enter the following command in root view.
root> platform security access-control password first-login set <first-
login>
To require users to change their password the first time they log in, enter the following command in root view:
root> platform security access-control password first-login set yes
Table 308 Force Password Change on First Time Login CLI Parameters
Parameter Input Type Permitted Values Description
first-login Boolean Yes
no
When yes is selected, the system
requires users to change their password
the first time they log in.
Displaying the System Password Settings (CLI)
Use the following command to display the system password settings:
root> platform security access-control password show-all