Chapter 1: Product description
33
l
5 GHz band: 4900 to 5925 MHz
Hardware components
The ODU (Outdoor unit) is a self-contained transceiver unit that houses both radio and networking
electronics. The main hardware components of the PMP/PTP 450b Retro Series are as follows:
l
PMP/PTP 450b Retro SM
The PMP/PTP 450b Retro Series is supplied in the following configuration:
Table 12 :PMP/PTP 450 Retro Series hardware configurations
ODU
Frequency
ODU type
PMP/PTP 450b Retro
4.9 to 5.925 GHz
(support 4.9, 5.1, 5.2, 5.4 and 5.8 GHz)
Integrated
8 dBi Integrated antenna
Support ed int eroperabilit y for 4 50 m/ 4 50 i/ 4 50 b
4 50 series
The supported interoperability among various 450m/450i/450 Series hardwares are listed below:
Table 13 :Supported Interoperability for PMP
Band
AP
SM
4.9, 5.1, 5.2 and
5.9 GHz
PMP 450m
AP
PMP 450i SM, PMP 450b SM , PMP 450b Retro SM
4.9, 5.1, 5.2 and
5.9 GHz
PMP 450i AP
PMP 450i SM, PMP 450b SM , PMP 450b Retro SM
PMP 450
MicroPoP
5.4 and 5.8 GHz
PMP 450m
AP
PMP 450i SM, PMP 450 SM, PMP 450d SM, PMP 450b SM and PMP
450b Retro SM, PMP 430 SM
PMP 450i AP
PMP 450 AP
PMP 450
MicroPoP
3.5 and 3.65
GHz
PMP 450 AP
PMP 450 SM, PMP 450i SM, PMP 450b SM
PMP 450i AP
PMP 450i SM, PMP 450 SM, PMP 450b SM
PMP 450m
AP
PMP 450i SM, PMP 450 SM, PMP 450b SM
2.4 GHz
PMP 450 AP
PMP 450 SM
900 MHz
PMP 450i AP
PMP 450 SM
Table 14 :Supported Interoperability for PTP
Summary of Contents for PMP 450 Series
