Chapter 1: Product description
System management
Page
1-25
Radio recovery mode
The 450 Platform Family recovery mode provides a means to recover from serious configuration errors
including lost or forgotten passwords and unknown IP addresses.
The recovery procedure for 450m/450i/450b series and 450 series ODUs differ due to difference in
hardware. This procedure for 450i/450m Series is known as Radio Recovery Console and for 450 Series
is known as Default mode (or Default/Override Plug).
Radio Recovery Console – 450i, 450b and 450m Series
The Radio Recovery Console mode supports:
•
Restoring factory default IP address 169.254.1.1 and password
•
Boot with factory default Canopy system software settings
•
Load previously installed SW images
See Radio Recovery Console-PMP/PTP 450i/450b and PMP 450m in Configuration Guide for more
details.
Default Mode (or Default Plug) – 450 Series
A default plug is available to provide access to a module whose password and/or IP address have been
forgotten.
This plug allows the 450 Series ODUs to be accessed using IP address 169.254.1.1 and no password.
During the override session, you can assign any new IP address and set either or both user passwords
(display-only and/or full access) as well as make other parameter changes.
See Default Mode (or Default/Override Plug) – PMP/PTP in Configuration Guide for more details.
