Cambium Networks PMP 450 AP, Configuration Manual

Page: 121 / 649

Chapter 1: Configuration General configuration
Page
1-93
Attribute Meaning
Update Application
Address
Enter the address of the server to access for software updates on this
BHM and registered BHS.
Prioritize TCP ACK
To reduce the likelihood of TCP acknowledgement packets being
dropped, set this parameter to Enabled. This can improve throughput
that the end user perceives during transient periods of congestion on the
link that is carrying acknowledgements.
Multicast Destination
Address
Using Link Layer Discovery Protocol (LLDP), a module exchanges
multicast addresses with the device to which it is wired on the
Ethernet interface. Although some switches (CMM4, for example)
do not pass LLDP addresses upward in the network, a radio can
pass it as the value of the Multicast Destination Address
parameter value in the connected device that has it populated.
Latitude
Longitude
Height
Physical radio location data may be configured via the Latitude,
Longitude and Height fields.
Latitude and Longitude is measured in
Decimal Degree while the
Height is calculated in Meters.
PTP 450b BHS
Table 29 General page attributes – PMP 450b BHS