Chapter 1: About This User Guide
15
Note
If grounding kit is installed, ensure the grounding kit is bonded to the tower or
Tower Ground Bus Bar (TGB).
Connection examples of pole or tower installations are shown in below figure.
Figure 2 :
Grounding and lightning protection on pole or tower
Wall mount guidelines
If you need to install AP on the wall of a building, then in addition to the general protection requirements,
follow the below requirements also:
Ensure that the position of the equipment is lower than the top of the building or its lightning air terminal.
Ensure that the building is correctly grounded.
Connection examples of wall installations are shown in below figure.
Figure 3 :
Grounding and lightning protection on wall