Connecting 60 GHz cnWave™ Products
43
1. Remove the LC connector dust caps from the ODU end (optical cable only).
2. Plug the connector into the SFP module, ensuring that it snaps home.
Optical
Copper
Fitting the gland
1. Fit the gland body to the SFP port and tighten it to a torque of 5.5 Nm (4.3 lb ft).
2. Fit the gland nut and tighten until the rubber seal closes on the cable. Do not over-tighten the gland
nut, as there is a risk of damage to its internal components.