Cambium Networks cnPilot Home R200 Series, User Manual

Page: 35 / 136

Configuring Basic Settings
pmp-0884 (September)
2-7
Setting up Wireless Connections
To set up the wireless connection, please perform the following steps.
Enable Wireless and Setting SSID
Open Wireless > Basic webpage as shown below:
Table 10 Wireless > Basic web page (user view)
Field Name Description
Radio On/Off
Select “Radio Off” to disable wireless operation
Select “Radio on” to enable wireless operation
Please note: “Save” required for this parameter change
Network Mode Choose one network mode from the drop down list.
SSID
The logical name of the wireless connection (text, numbers or various special
characters)
Multiple SSID 1-4 Multiple SSID 1 - 4, configure up to 4 unique SSIDs
broadcast(SSID)
Enabled: The device SSID is broadcast at regular intervals
Disabled: The device SSID is not broadcast at regulatr intervals, disallowing wi-fi
clients from automatically connecting to the cnPilot
AP Isolation Enabled: Devices connected to the router are isolated from one