cam ZPH Series, Operating Manual

Page: 8 / 40

8/40
2.2. Operating pressure and oil flow rate
Positioning
Model Operating pressure Oil flow rate Hydraulic
functions
Min Recommended Max Min Recommended Max
bar bar bar l/min l/min l/min
ZPH25T 140 160 160 4 8 12 2
ZPH25 140 160 160 4 8 12 1
ZPH35T 140 160 160 4 8 12 2
ZPH35 140 160 160 4 8 12 1
ZPH50T 140 160 160 4 8 12 2
Sideshifting
Model Operating pressure Oil flow rate Hydraulic
functions
Min Recommended Max Min Recommended Max
bar bar bar l/min l/min l/min
ZPH25T 155 160 210 4 8 12 2
ZPH25 – – – – – – 1
ZPH35T 155 160 210 4 8 12 2
ZPH35 – – – – – – 1
ZPH50T 155 160 210 4 8 12 2
• A flow rate less than recommended will result in a lower rotating. speed.
• A flow rate greater than the maximum can result in excessive heating, reduced system
performance and reduced hydraulic system life.
2.3. Main components of the product
With sideshifter PH
4
5
1
2
6
3
Without sideshifter
4
5
2
3
N° Component
1 Sideshifting device
2 Adjust device
3 Frame
4 Sliding pads
5 Lifting hook
6 Locking tab