Calrec SUMMA, User Manual

Page: 46 / 198

PRESETS
A preset is a complete copy of a path from which you can choose elements to load onto another path. Using
presets can speed up workflow when several paths with similar settings are required.
When a new preset is made a full copy of the path is taken. Setting the scope of a preset defines which elements of the
path are copied to a path when the preset is loaded. The scope of the preset can be set at any time.
FIGURE 1 -
PRESETS SCOPE
Creating a Preset
To create a preset from the currently accessed path:
1. Tap
PATH PRESETS
in the Access bar.
2. Navigate to where you wish to save the preset, making a new folder if necessary.
3. Tap
NEW
.
4. If you are overwriting a previously saved preset a red dialogue will be displayed to warn you of the potential overwrite.
Tap
OVERWRITE
or
CANCEL
. Otherwise, you will be directed to enter a label and description and set the scope of
the preset, then tap
CREATE NEW PRESET
or
CANCEL
to discard any changes.
FIGURE 2 -
CREATING A PRESET
46 SUMMA
Networked Audio Production System
SYSTEM OVERVIEW