Calrec BRIO 36, User Manual

Page: 196 / 210

196 BRIO 36
Audio Production System with Optional Networking
CONSOLE FACILITIES
SYSTEM STATUS MONITORING
Brio 36 constantly monitors the functioning of all system components and connections and reports warnings, faults
and information to the user. There are three types of system status message:
Error messages report a serious error message that could cause, or has caused the
system to fail. Errors normally require user intervention to correct the problem before
operation can continue.
Warning messages indicate where the system has located a fault or a failure, but will still
operate without intervention. Warnings indicate that the system should be checked as it
may be running on secondary components.
Information messages inform users when certain actions take place. They do not report
errors and no action needs to be taken in response to them.
The system status notification button is situated within the notifications area to the top right
of the touch display when in ‘active Show’ view. Under normal operating circumstances
the system status button will look like this.
Notifications
Tap the system status button to display the pop-up which lists all messages in a sortable table. Tap the table headers to
sort the messages. There are four view selection buttons along the bottom of the pop-up which allow the user to filter
out messages by type, for example, if the user does not want to see any messages which have already been fixed, tap
to switch off the
FIXED view button. Selecting any of the messages populates the ‘message description’ field with a
description of the message.
FIGURE 1 -
SYSTEM STATUS POP-UP