manualshive.com logo in svg

Calrec BRIO 36, User Manual

Share
Download
Calrec BRIO 36 User Manual Download Page 150

150   BRIO 36 

Audio Production System with Optional Networking

MONITORING

MONITOR CONTROLS

The monitor bar provides access to monitor controls, monitor source settings and visual feedback from the surface 
monitor controls.

Tap either the console monitor or one of the studio monitor selection buttons to view the monitor pop-up, which is 
described in detail here: 

“THE MONITORING POP-UP” on page 151

.  Figure 1 explains each control that is available 

from the monitor bar.

FIGURE 1 - 

THE MONITOR BAR EXPLAINED

Note: the Console and Studio 1 monitors are surround.  If using only a stereo pair of speakers for these monitor, ensure 
that phantom centre is selected in the options - if this is not done, when mono is pressed on the surface to hear a mono 
downmix, the user will hear nothing as the mono downmix is routed to centre speaker unless phantom centre is selected.

Summary of Contents for BRIO 36



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands