Calrec BRIO 36, User Manual

Page: 15 / 210

15
Serial Numbers
All units produced by Calrec are given a serial number and are booked into a central record system at the time of
manufacture. These records are updated whenever a piece of hardware is dispatched to or received from a customer.
When contacting Calrec Customer Support with a hardware inquiry it is important that the correct Calrec serial number is
provided to enable the customer support team to provide a high level of service. Brio 36 serial numbers can be found on
the label on the rear of the chassis as shown in Figure 1.
FIGURE 1 - LABEL ON REAR OF CHASSIS
After Sales Modifications
Please be aware that any modifications other than those made or approved by Calrec Audio Limited or their agents, may
invalidate the consoles warranty. This includes changes to cabling provided by Calrec and variations to the recommended
installation as detailed in Calrec documentation.
Modifications to this equipment by any party other than Calrec Audio Limited may invalidate EMC and safety features
designed into this equipment. Calrec Audio Limited can not be liable for any legal proceedings or problems that may
arise relating to such modifications.
If in doubt, please contact Calrec Audio Limited for guidance prior to commencing any modification work.
Installation
In many installations the AC power connectors will not be readily accessible, effectively making the equipment
permanently connected. The installation should be carried out in accordance with all applicable installation rules and
regulations.
Service Personnel
The AC power disconnect devices are the 2 x IEC (IEC60320-1 C13/C14) couplers located at the rear of each unit.
WARNING: The apparatus has a dual power system. It is essential that BOTH AC power IEC couplers are disconnected
to prevent exposure to hazardous voltage within the unit.
Third Party Equipment
Integrating third party equipment into a Calrec system may compromise the product’s ability to comply with the Class B
radiated emission limits set in the latest EMC (Electro Magnetic Compatibility) standard.
Calrec Audio Limited can not be responsible for any non-conformities due to use of third party equipment. If in doubt,
please contact Calrec Audio Limited for guidance prior to integrating any third party equipment.