Calrec BRIO 36, User Manual

Page: 145 / 210

145
COPY AND PASTE
It’s quick and easy to copy properties from one path and paste them to another
1. Access the path that to copy properties from and tap COPY in the top right corner of the Access bar as shown in
Figure 1.
2. Tap to select the properties to copy SELECT ALL and SELECT NONE can be used if required and tap COPY or
CANCEL as shown in Figure 2
3. Access the path(s) to paste the properties to and tap PASTE in the Access bar.
FIGURE 1 -
COPY AND PASTE BUTTONS
FIGURE 2 -
COPY PATH PARAMETERS