background image

Electronics

For technical assistance call: 

323-465-2131

CALRAD

R

www.calrad.com

Plasma, LCD- 

 Monitor, DLP Projector

L.E.D.,

Single Cat5e or Cat6 Cable

RJ45

Output

RJ45

Input

5Vdc Power Supply

5Vdc Power Supply

40-IRC Interface Cable Included

Satellite, Bluray, STB, Media PC

92-152

IR Emitter

40-1090-3D-IR Transmitter

40-1090-3D-IR Receiver

IR Remote

Control

IR

Receiver

Power

Power

IR

 Receiver

IR

 Emitter

HDMI

Output

 

HDMI

Input

 

Please Note!

Some distances may vary and are dependent on 
manufactures individual HDMI specifications. All 
products should be fully tested prior to committing 
to a UTP Cat5e, Cat6 solution and sealing long 
runs of cables inside walls, possibly compromising 
your installation.

•  

HDTV Resolutions:

   Cat5e 62M (200 ft. max) 480i/p, 720p, 1080i 
•  CAT5e 33M (110 ft. max) up to1080P,
   CAT6 43M (140 ft. max)@1080p @ 24/50/60Hz
• 

 IR Carrier Frequency: 

30kHz - 60kHz

•  

IR Cable Input/Output interface:

   1 x 3.5mm Mono Jack,  (IR Emitter)
•  

Connectors:

 HDMI ln/Out Connectors,

 

19 pin

   Female Jack, 1 x RJ45 Shielded Jack each unit.
•  

DC Power Supply:

 2 x 5V, 1Amp Regulated

•  

Weight: Transmitter:

 150g/

 Receiver:

 140g

•  

Transmitter:

 L-2.64” x W-4.0” x H-1.1”

•  

Receiver: 

L-4.0” x W-2.6” x H-1.1”

92-179

 Interface cable for connecting

directly to the 

92-160

 or 

92-165

 IR block

The receiver can be 

powered by the 

transmitter over the 

Cat5e/Cat6 cable up 

to 50ft. from the 

transmitter. Use the 

5Vdc power supply 

over 50ft. distances.

Brochure & Typical Application Sheet

40-1090-3D-IR-6122015-WB

Copyright C

ALRAD

 E

LECTRONICS

 2015

All specifications subject to change without notice

Electronics

For technical assistance call: 

323-465-2131

HDMI Plus IR

Over UTP Cat 5e/6

Extender\Transmitter

Tx

R

CALRAD

1080p - 3D Signal

40-1090-3D-IR

Part No.

Electronics

For technical assistance call: 

323-465-2131

HDMI Plus IR

Over UTP Cat 5e/6
Extender\Receiver

Rx

R

CALRAD

1080p - 3D Signal

40-1090-3D-IR

Part No.

40-1090-3D-IR

HDMI- IR BALUN OVER 

SINGLE CAT5e/6 CABLE

Receiver

Transmitter

Sold in Pairs

FCC, UL Approved Devices

Please Note! 

We recommend Cat6

cable for reliable 3D signal delivery.

CABLE DISTANCE:

CAT5e: 480i, 720p, 1080i - 125 ft.

CAT6: 1080p - 148 ft.

POE

50 FT.

OR LESS

From Start to Finish

Connector

Wiring Diagram

568B

HDMI Cable

6 ft. max length

HDMI Cable

6 ft. max length

5Vdc Power Supply

HDMI

Input

3

D

Compliant

D

3

The 

40-1090-3D-IR

 balun provides a single UTP category 5e/6 

cable solution to deliver pristine digital signals from all HDTV 

formats and signal sources from 480i/p to1080i/p. Balun 

technologies are perfect solutions for replacing HDMI & IR cables 

that are limited to shorter distances and difficult to route thru walls 

and cabinets. Balun technology also offers many advantages when 

HDTV video technology changes by installing new updated baluns 

with the latest technology. 

Note!: Set IR Switch to 

RX 

Note!: Set IR Switch to

 TX 

Reviews: