background image

Page 9 / 80

GQ, GX, GM Rev. 5 - Operating Instructions

GB

THIS INSTRUCTION MANUAL IS THE PROPERTY

OF CALPEDA S.P.A. ANY REPRODUCTION, EVEN

IF PARTIAL, IS FORBIDDEN

SUMMARY

General information . . . . . . . . . . . . . . . . . . . . 9

TECHNICAL DESCRIPTION . . . . . . . . . . . . . 9

TECHNICAL FEATURES . . . . . . . . . . . . . . . 10

4  

SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

5. 

TRANSPORTATION AND HANDLING . . . . 11

6. 

INSTALLATION . . . . . . . . . . . . . . . . . . . . . . 11

7. 

START-UP AND OPERATION . . . . . . . . . . . 12

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . 13

DISPOSAL . . . . . . . . . . . . . . . . . . . . . . . . . . 14

10  SPARE PARTS. . . . . . . . . . . . . . . . . . . . . . . 14
11  TROUBLESHOOTING . . . . . . . . . . . . . . . . . 15
12  ANNEXES. . . . . . . . . . . . . . . . . . . . . . . . . . . 71
12.1  Dimensions and weights. . . . . . . . . . . . . . . . 71
12.2  Electrical diagram . . . . . . . . . . . . . . . . . . . . . 75
12.3 Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Copy of the declaration of conformity . . . . . . . . . . 79

1 GENERAL INFORMATION

Before  using  the  product  carefully  read  the  informa-
tion contained in this instruction manual, the manual
should be kept for future reference.
Italian  is  the  original  language  of  this  instruction
manual,  this  language  is  the  reference  language  in
case of discrepancies in the translations.
This  manual  is  part  of  the  essential  safety  require-
ment and must be retained until the product is finally
de-commissioned.
The customer, in case of loss, can request a copy of
the  manual  by  contacting  Calpeda  S.p.A.  or  their
agent,  specifying  the  type  of  product  data  shown  on
the label of the machine (see 2.3 Marking)
Any  changes,  alterations  or  modifications  made  to
the product or part of it, not authorized by the manu-
facturer,  will  revoke  the  "CE  declaration"  and  war-
ranty.

This appliance should not be ope-

rated  by  children  younger  than  8

years, people with reduced physi-

cal,  sensory  or  mental  capacities,

or  inexperienced  people  who  are

not  familiar  with  the  product,

unless they are given close super-

vision  or  instructions  on  how  to

use it safely and are made aware

by  a  responsible  person  of  the

dangers its use might entail.

Children  must  not  play  with  the

appliance.

It  is  the  user's  responsibility  to

clean  and  maintain  the  applian-

ce.  Children  should  never  clean

or  maintain  it  unless  they  are

given supervision.

Do  not  use  in  ponds,  tanks  or

swimming pools or where people

may  enter  or  come  into  contact

with the water.

Read  carefully  the  installation

section which sets forth:

- The  maximum    permissible

structural    working  pressure

(Chapter 3.1). 

- The  type  and  section  of  the

power cable (Chapter 6.8). 

- The type of electrical protection

to be installed (Chapter 6.8).

1.1 Symbols

To improve the understanding of the manual, below are

indicated the symbols used with the related meaning.

Information and warnings that must be observed,

otherwise there is a risk that the machine could

damage or compromise personnel safety.
The failure to observe electrical information and

warnings,  could  damage  the  machine  or

compromise personnel safety.
Notes  and  warnings  for  the  correct

management of the machine and its parts.

Operations that could be performed by the final

user. After carefully reading of the instructions,

is  responsible  for  maintenance  under  normal

conditions.  They  are  authorized  to  affect

standard maintenance operations.
Operations that must be performed by a qualified

electrician.  Specialized  technician  authorised  to

affect  all  electrical  operations  including

maintenance. They are able to operate with in the

presence of high voltages.
Operations  that  must  be  done  performed  by  a

qualified  technician.  Specialized  technician  able

to  install  the  device,  under  normal  conditions,

working during "maintenance", and allowed to do

electrical  and  mechanical  interventions  for

maintenance. They must be capable of executing

simple  electrical  and  mechanical  operations

related to the maintenance of the device.
Indicates that it is mandatory to use individual

protection devices.

Operations that must be done with the device

switched off and disconnected from the power

supply.

Operations that must be done with the device

switched on.

1.2 Manufacturer name and address

Manufacturer name: Calpeda S.p.A.

Address: Via Roggia di Mezzo, 39

36050 Montorso Vicentino - Vicenza / Italia

www.calpeda.it

1.3 Authorized operators

The  product  is  intended  for  use  by  expert  operators

divided  into  end  users  and  specialized  technicians.

(see the symbols above).

It's  forbidden,  for  the  end  user,  carry  out

operations  which  must  be  done  only  by

specialized  technicians.  The  manufacturer

declines any liability  for damage related to the

non-compliance of this warning.

i

OFF

ON

i

IST GQ_GX_GM_07_2018R5_MXS 11_03con gall  09/07/18  09:06  Pagina 9

Summary of Contents for GQ

























Reviews: