![background image](http://html.mh-extra.com/html/calpeda/bs-v-emt-series/bs-v-emt-series_operating-instructions-manual_485130008.webp)
GB
Page 8 / 32
BSV..EMT_ITT Rev2 - Operating Instructions
THIS INSTRUCTION MANUAL IS THE PROPERTY
OF CALPEDA S.P.A. ANY REPRODUCTION,
EVEN IF PARTIAL, IS FORBIDDEN
1. GENERAL INFORMATION
Before using the product carefully read the
information contained in this instruction manual, the
manual should be kept for future reference.
Italian is the original language of this instruction
manual, this language is the reference language in
case of discrepancies in the translations.
This manual is part of the essential safety
requirement and must be retained until the product
is finally de-commissioned.
The customer, in case of loss, can request a copy
of the manual by contacting Calpeda S.p.A. or their
agent, specifying the type of product data shown on
the label of the machine (see 2.3 Marking)
Any changes, alterations or modifications made
to the product or part of it, not authorized by the
manufacturer, will revoke the “CE declaration” and
warranty.
This appliance should not be operated
by children younger than 8 years,
people with reduced physical, sensory
or mental capacities, or inexperienced
people who are not familiar with the
product, unless they are given close
supervision or instructions on how to
use it safely and are made aware by a
responsible person of the dangers its
use might entail.
Children must not play with the
appliance.
It is the user's responsibility to clean
and maintain the appliance. Children
should never clean or maintain it
unless they are given supervision.
Do not use in ponds, tanks or
swimming pools or where people may
enter or come into contact with the
water.
Read carefully the installation
section which sets forth:
- The maximum permissible
structural working pressure
(chapter 3.1).
-
The type and section of the
power cable (chapter 11).
- The type of electrical protection
to be installed (chapter 6.5).
1.1. Symbols
To improve the understanding of the manual, below
are indicated the symbols used with the related
meaning.
Information and warnings that must be
observed, otherwise there is a risk that the
machine could damage or compromise
personnel safety.
The failure to observe electrical information
and warnings, could damage the machine or
compromise personnel safety.
i
Notes and warnings for the correct
management of the machine and its parts.
Operations that could be performed by
the final user. After carefully reading of the
instructions, is responsible for maintenance
under normal conditions. They are
authorized to affect standard maintenance
operations.
Operations that must be performed by a
qualified electrician. Specialized technician
authorised to affect all electrical operations
including maintenance. They are able
to operate with in the presence of high
voltages.
Operations that must be done performed by a
qualified technician. Specialized technician
able to install the device, under normal
conditions, working during “maintenance”,
and allowed to do electrical and mechanical
interventions for maintenance. They must
be capable of executing simple electrical
and mechanical operations related to the
maintenance of the device.
Indicates that it is mandatory to use
individual protection devices.
OFF
Operations that must be done with the
device switched off and disconnected from
the power supply.
ON
Operations that must be done with the
device switched on.
SUMMARY
1. GENERAL INFORMATION ........................8
2. TECHNICAL DESCRIPTION ......................9
3. TECHNICAL FEATURES ...........................9
4. SAFETY....................................................10
5. TRANSPORT AND HANDLING ...............10
6. INSTALLATION ........................................10
7. STARTUP AND OPERATION ...................12
8. MAINTENANCE .......................................13
9. DISPOSAL ................................................13
ELECTRICAL DIAGRAM ..................................26
Minimum cross-sectional area of conductors ...30
Declaration of conformity ..................................32