Page | 1
User Guide
1.
Check Box Contents
(i)
Call Saint Nuisance Call Blocker
(ii)
Call Saint Nuisance Call Blocker stand
(iii)
Cable 1 (short cable): 15cm / RJ11 to BT socket adaptor
(iv)
Cable 2 (long cable): 300cm / RJ11 to BT socket cable
The Call Saint Nuisance Call Blocker is powered by the phone line. No
plugs or batteries are required.
2.
Plug In
Refer to the Quick Setup Guide (with images) or use the instructions below.
without ADSL Micro-filter…
Step 1
Plug the short cable supplied (RJ11 male to BT female) into the socket
marked “TO PHONE” (left socket) on the call blocker
Step 2
Unplug your telephone line cable from your telephone wall socket.
Step 3
Plug your telephone line cable into the other end of the short cable.
Step 4
Plug the long cable supplied (RJ11 male to BT male) into your telephone
wall socket.
Step 5
Plug the other end of the long cable into the socket marked “TO LINE”
(right socket) on the call blocker
