
User Manual - Rev AJ
California Instruments
Figure 9-33: MIL704 Menu
9.6.1.6 Revision Selection
The default Re
the front panel. Scroll to the REVISION entry
vision is E. Revisions supported are D and E. The Revision can be changed from
using the up and down cursor keys (see Figure
9.6.1.7 AC MODE TESTS
9-33). Use the shuttle to change the selection.
9.6.1.7.1 Steady State Test
Scroll to the STEADY STATE AC entry using the up and down cursor keys. Press the ENTER
key to select the STEADY STA
e
appear as shown in Figure 9-34.
TE scre ns. The screen will
Figure 9-34: Steady State Menu
The MIL704 Steady state 1 and Steady state 2 screens have the following tests:
1 VOLTAGE
2 FREQUENCY
3 VOLT
UNBALANCE
OLT
MODULATION
FREQ
MODULATION
down
VOLTAGE
This test will change the output voltage in the following sequence:
•
118V for 1 minute.
e.
The
←
key (backspace) will terminate the test at any time.
4 PHASE
DIFFERENCE
5 V
6
7 DISTORTION
The above tests can be selected by scrolling to the highlighted selection using the up and
cursor keys and the ENTER key to start the selected test.
•
108V for 1 minute.
•
115V for 1 minut
MX Series
227