![background image](http://html1.mh-extra.com/html/california-instruments/2001rp/2001rp_user-and-programming-manual_3444999018.webp)
User and Programming Manual - Rev N
2.8 Front Panel Controls
Parameter
Specification
Controls: Shuttle
knobs:
Allows continuous change of Voltage, Frequency and Current
limit. Voltage change is inactive on single voltage range
configuration units.
Function
keys:
Controls Output state, Voltage range and Display mode.
Displays:
Two, 4 digits, 0.5” LCD display. For viewing programmed
voltage, frequency, current limit and for displaying measured
current.
Status Indicators:
10 LEDs to indicate:
REMOTE, FAULT, OUTPUT (ON/OFF), VOLTAGE RANGE
HIGH, VOLTAGE RANGE AUTO
FREQUENCY, CURRENT, PEAK CURRENT, POWER, POWER
FACTOR DISPLAY MODES (Refer to paragraph 4.1.2).
2001RP April
2007
9
Summary of Contents for 2001RP
