background image

3

Customer Support: 1-866-409-4581

AIR COMPRESSOR

how to find a local service center:

even quality built equipment might need service or repair parts.

Contact the California Air Tools Customer Service department:
Phone: 1-866-409-4581
Online: WWW.CALIFORNIAAIRTOOLS.COM

please provide the information below:

Model number and Serial number and specifications shown on the

Model number/Serial number plate.
Part number or numbers shown in the parts list section of the

owner’s manual for your air compressor model.
A brief description of the trouble with the air compressor.

do not return your air compressor for service or parts to the

store/dealer where purchased.

IMPORTANT SAFeTy

INSTRuCTIONS

Safety messages & Signal Words:

DANGER

Moving parts can cause severe trauma.

Keep hands and feet away from rotating parts, tie up 
long hair, remove jewelry, and DO NOT wear loose 
clothing.

KICKBACK

DANGER

There is a danger of electric shock.

Use only undamaged electrical cords.

DO NOT touch bare wires or receptacles.

DO NOT operate air compressor in wet weather or in 
wet conditions.

DO NOT touch air compressor or cords if hands or 
feet are wet.

Ensure that all cords are free of damage before 
connecting to the power supply.

Ensure that you have a sufficient electrical supply for 
supporting the requirements of the motor.

SHOCK

Summary of Contents for Industrial 6010LFC


















Reviews: