EN-4
10
7
1
2
3
4
4
4
5
5
6
6
8
9
Dashboard
TO SUPPORT THE UNIT
Detaching and attaching the front panel
The front panel of this unit can be detached in order to prevent the unit from being stolen.
FOLDING DOWN AND DETACHING/ATTACHING THE FRONT PANEL
Before detaching the front panel, be sure to press the
button (1) OFF first.
Then press the
button (16), let the Front Panel arrive in horizontal position and detach the panel by
pulling it towards you as illustrated.
Notes:
•
Do not press the front panel hard against the unit when attaching it. It can be easily attached by
pressing it lightly against the unit.
•
When you carry the front panel with you, put it in the supplied front panel case.
•
Do not press hard or give excessive pressure to the display window of the front panel when attaching
it to the unit.
CLEANING THE CONNECTOR
The unit may not function properly if the connectors between
the unit and the front panel are contaminated with dirt. In
order to prevent this from happening, detach the front panel
by pressing the
button and clean the connector from
time to time.
Clean the connector with a cotton swab together with contact
cleaner as illustrated. Be sure to clean them carefully pin by
pin and make sure not to damage the connecting points.
1. UNIT
2. RELEASE CASE
3. DASH BOARD
4. HEX NUT
5. LOCK WASHER
6. PLAIN WASHER
7. CAR BODY
8. REAR SUPPORT STRAP
9. TAPPING SCREW
10. M5 X 15 HEX BOLT
2
1
< 10°
Cotton Swab
Rear of
front panel
Main unit
Summary of Contents for RCD 266
Page 1: ......
