Lightning protection
Fully isolated between the two destinations
No ground loops
bug proof
The module includes a Tx and a Rx module
TX --- optical transmitter which converts from IF input spectrum to optical output at 1310nm
RX --- optical receiver which regenerates the optical signal back to an IF spectrum
SatService offer the LFTRX modules for different frequency bands.
sat-nms LFTRX-B --- 50 to 2150MHz
sat-nms LFTRX-L --- 950 to 2150MHz
sat-nms LFTRX-10 --- 10MHz only
Installation
: The installation chapter guides through the installation and setup of the sat-
nms LFTRX. It describes the mechanical concept of the chassis and the assignment of the
connectors.
Operation
: Operating the sat-nms LFTXR is mostly self-explanatory. Nevertheless, the
'Operation' chapter outlines the sat-nms LFTRX user interface and elaborately describes
the meaning of each alterable parameter.
Remote Control
: The sat-nms LFTRX provides a versatile remote control interface. A
monitoring & control software may fully operate the sat-nms LFTRX through a analog
interface. This chapter lists all parameters accessible through the remote interface.
Theory of Operation
: This chapter gives a short overview how the optical links work and
which features are supported.
Specifications
: At the end of the document, the specifications applicable to the sat-nms
LFTRX are summarized in this chapter.
Support and Assistance
If you need any assistance regarding our sat-nms Optical Links, don't hesitate to contact us. We
would be pleased to help you by answering your questions.
SatService GmbH
Hardstrasse 9
78256 Steisslingen
Germany
phone +49 7738 99791-10
www.satnms.com
(C) 2021, SatService GmbH
www.satnms.com
LFTRX-UM-2107 Page 3/12