Thermosight HT
6
Display functions / Setting keys
Additionally to the temperature measurement the
THERMOSIGHT HT
provides some more func-
tions which are necessary for a correct measurement and usefully enlarging the functionality of the
pyrometer.
Temperature display
Parameter / function
Laser targeting light function on / off
Indication
°C or °F
Parameter value / function value
Setting keys:
1) Parameter selection
PAR
2) change of parameter values:
Indication °C or °F:
indicates the temperature in °C or °F.
Temperature display:
shows the actual or stored temperature value.
Parameter / function:
selecting a parameter or a measuring function for indication or changing a
corresponding short form will be displayed.
Parameter value / function value:
indicates the value of the adjusted parameters or the tempera-
ture of the selected measuring function.
PAR key:
Repeated pushing of the PAR
key displays all available parameters (as EMI, HI, INT,
C/F) or additional measuring functions in the following sequence mentioned below. Parameters are
part of the basic settings of the pyrometer. They are only displayed during adjustment. Measuring
functions are displayed additionally to the measuring temperature (MAX, MIN, AVG, DIF), can give
an acoustic signal (HI) or can be used for data analysis (RCL). Selected measuring functions are
stored when the pyrometer is switched off and will be activated by restarting the instrument.
PAR
Display
Parameter /
function
Short explanation
Factory
settings
1 x
EMI
Emissivity
indication and setting of emissivity
100
2 x
MAX
Max. value
indication of maximum value
-
3 x
MIN
Min. value
indication of minimum value
-
4 x
AVG
Average
indication of average value
-
5 x
DIF
Difference
indication of the difference between the actual measur-
ing temperature and the start measuring temperature
-
6 x
HI
Hi alarm
indication and setting of acoustic alarm
1800°C
7 x
CLR
Clear
deletes the stored measured values
8 x
STO
#
Store
fixing of storage position
9 x
RCL
#
Recall
indication of stored measured values
10 x
INT
Interval
indication and setting of time interval for storage of
measured values in continuous mode
OFF
11 x
C / F
Celsius
/
Fahrenheit
indication and setting of temperature reading
in °C or °F
C
Arrow keys:
With the arrow keys
and
the corresponding settings for all parameters can be changed. A
change in setting of a parameter is stored automatically.
- 9 -
