2
Front panel
Symbols used
The symbols shown below are a selection of those displayed during system operation.
LED indicators:
1
Red LED: steady (alarm notification with system locked)
flashing (fault, system operating)
2
Yellow LED:
indication of cleaning or additives delivery in
progress or resumption of operations following
reset
3
Green LED:
flashing (initial cleaning)
steady on (normal
operation)
4
UP button
5
DOWN button
6
BACK button
7
Confirmation/OK button
Caleffi S.p.A.
S.R. 229 n° 25
28010 Fontaneto d’Agogna
Italy
Series 579
Supply: 230V (ac) ±10%
Power: 225VA
T
AMB
: 5–50°C
IP 42
H0004833
✔
1
2
3
4
5
6
7
Display
The following information normally appears on the display:
Day of the week
Probe S1 pressure
Operating status
Measured
Δ
p
Time
Probe S1 temperature
B = battery alarm
I = input relay IN1 energized
Day of the week
Probe S1 pressure
Operating status
Measured
Δ
p
Time
Probe S1 temperature
B = battery alarm
I = input relay IN1 energized
From the main display in standby mode, press any key once to activate the display, press again to view the operating status:
Meaning
Display message
Alternate message
Strainer with all valves closed and washing
not started
Device filling phase
Drainage phase
Drain valve closing
Plant inlet valve opening
Plant inlet valve closing (with dirty strainer)
Strainers cleaning in progress
Internal functional tests
System not operating, with error 11
(For details of errors refer to the faults table)
Sleep function enabled
Filtration
NOTE
: to change language refer to menu point 2.2
Summary of Contents for DIRTMAGCLEAN 579 Series
Page 14: ...14...
