CALEFFI DIRTMAGCLEAN 579 Series, Programming Manual

Page: 12 / 14

12
MON0025 25
status of command outputs,
represented with an 8-bit
integer.
1 0
Bit 0: motor command
Bit: 1 drain valve command
Bit: 2 domestic water valve command
Bit: 3 inlet valve command
Bit: 4 cooling output command
Bit: 5 inhibition output command
Bit: 6 alarm output command
Bit: 7 voltage free output command
U8
MON0027 27
status of inputs, represented
with an 8-bit integer.
1 0
Bit: 0 inhibition input status
U8
MON0030 30
number of cleaning cycles
performed by the device, repre-
sented with a 16-bit integer
1 0 U16
MON0031 31
alarm code present on device,
represented with an integer
1 0
Alarm identification code:
1: low pressure alarm on sensor 1
2: low pressing alarm on sensor 2
3: leakage alarm
4: seepage alarm
5: inlet valve blocked alarm
7: drain valve blocked open alarm
8: drain valve blocked closed alarm
10: error, communication with sensor 1
not possible
12: error, communication with sensor 2
not possible
13 : domestic water low pressure alarm
14: air vent blocked alarm
15: sensor 1 clip break alarm
16: sensor 2 clip break alarm
20: sensor 1 pressure measurement
error
21: sensor 1 pressure measurement
over range error
22: sensor 1 pressure measurement
under range error
23: sensor 1 temperature measurement
error
24: sensor 1 temperature measurement
over range error
25: sensor 1 temperature measurement
under range error
26: sensor 2 pressure measurement
error
27: sensor 2 pressure measurement
over range error
28: sensor 2 pressure measurement
under range error
29: sensor 2 temperature measurement
error
30: sensor 2 temperature measurement
over range error
31: sensor 2 temperature measurement
under range error
U8
PA0000 1000 Current day (from 1 to 31). 1 1 1 1 31
PA0001 1001 Current month (from 1 to 12). 1 1 1 1 12
PA0002 1002 Current year (from 18 to 99). 1 1 18 18 99
PA0003 1003 Current time. 1 1 0 0 23
PA0004 1004 Current minutes. 1 1 0 0 59
PA0005 1005
Device communication config-
uration bit.
1 1 0x00 0x03 0xFFFF
bit 0 : enable communication with
MODBUS protocol
0 = communication not enabled
bit 1 = communication enabled
bit 1: communication parity enabling
0 = parity not enabled
1 = parity enabled
bits 2-7: undefined
PA0006 1006 Language selection 1 1 0x00 0x00 0x03
00 = IT
01 = EN
02 = FR
03 = DE