10/12/13
LMU-3000 Hardware & Installation Guide - PULS Wiki
https://puls.calamp.com/wiki/LMU-3000_Hardware_%26_Installation_Guide
6/33
PULS™ (Programming, Update and Logistics System) is CalAmp’s web-based maintenance server offering
out-of-the-box hands free configuration and automatic post-installation upgrades. PULS™ provides a means
for configuration parameters, PEG scripts, and firmware to be updated Over-The-Air (OTA) and allows
CalAmp customers to monitor unit health status across your customers’ fleets to quickly identify issues before
they become expensive problems.
2.2.6 LMU Manager™
LMU Manager is the primary configuration tool in the CalAmp system. It allows access to almost every
feature available to the LMU-3000™. Unlike the backend software, it has the option of talking directly to an
LMU-3000™ or making a request forwarded by the LM Direct™ server.
For further details on using LMU Manager, please refer to the LMU Manager Users Guide.
3 Hardware Overview
3.1 Location Messaging Unit-LMU-3000™
3.1.1 LMU-3000™ Handling Precautions
Electrostatic Discharge (ESD)
Electrostatic discharge (ESD) is the sudden and momentary electric current that flows between two objects at
different electrical potentials caused by direct contact or induced by an electrostatic field. The term is usually
used in the electronics and other industries to describe momentary unwanted currents that may cause damage
to electronic equipment.
ESD Handling Precautions
ESD prevention is based on establishing an Electrostatic Protective Area (EPA). The EPA can be a small
working station or a large manufacturing area. The main principle of an EPA is that there are no highly charging
materials in the vicinity of ESD sensitive electronics, all conductive materials are grounded, workers are
grounded, and charge build-up on ESD sensitive electronics is prevented. International standards are used to
define typical EPA and can be obtained for example from International Electro-technical Commission (IEC) or
American National Standards Institute (ANSI).
This ESD classification of the sub assembly will be defined for the most sensitive component, therefore the
following classifications apply:
Class 1B – Human Model (< 1 kV)
Class M1 – Machine Model (< 100V)
When handling the LMU-3000’s™ main-board (i.e. sub assembly) by itself or in a partial housing proper
ESD precautions should be taken. The handler should be in an ESD safe area and be properly grounded.
GPS Ceramic Patch Handling
