Cal Spas SWIM, Owner'S Manual, Page: 11 / 92

11
11
2018 Platinum Series Spas
LTR20181010, Rev. K
Pr
eparing f
or
Your Ne
w P
or
tab
le Spa
www.calspas.com
8
5 . Prime the pump .
4 . Turn on power to the spa .
6 . Install the filter into the filter canister.
Make sure the filter has soaked at least 30 minutes
before you install it. Insert the filter all the way and
screw it in. Do not over-torque the cartridge during
installation, just hand tighten gently.
7 . Adjust water chemistry .
Test and adjust the water chemistry. See the section on page 27 for instructions on water clarity.
8 . Let the spa heat up .
When the spa has finished priming, the heater will activate. Put the cover on and let the spa heat to the
set temperature.
When the spa is filled to the correct level, turn on the
power at the GFCI breaker. (Ensure that the 120V spas are
connected to the proper electrical outlet.)