Page 14
Owner’s Manual
S-200 Assembly Instructions
The following instructions will guide you through the assembly of the S-200 Sauna.
NOTE
:
The following steps deal with
Figure 10A.
1.
Assemble the bench. Screw the legs into the underside cross-support of the bench (
A
).
After assembling the bench, place the bench on the wooden flooring of the sauna.
2.
Place the heater bottom support on the front left corner and the place the heater on top of the heater sup-
port.
3.
Place the wall panels against the flooring and attach the panels (with the provided screws) to the floor
ing. Take the corner piece and attach to it to the wall panels (
B
). Repeat these steps, as necessary, to com-
plete the wall assembly.
NOTE
:
The following steps deal with
Figure 10B
.
4.
Place roof top panel onto the wall panel assembly. Place the 1”x2” roof supports, inside the sauna, up
against the roof top (
C
).
5.
Place the outside trim piece(s) flush with top of the roof (
D
).
6.
Place the heater bracket around the heater and secure it in place (
E
).
Figure 11A
. S-300 Infrared Sauna Step 1 through Step 3.
Owner’s Manual
Assembly
