background image

 

Cleaning and Maintenance 

2005 Spa Owner's Manual 

Page 49

 

7/21/2005 

 

Do not use products that contain lemon, vinegar or other acids on the granite the high acid content may etch 
the surface. 

 

Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. 

 

Change the rinse water frequently. 

 

Do not use scouring powders or creams; these products contain abrasives that may scratch the surface. 

Do's 

 

Do dust surfaces frequently 

 

Do clean surfaces with mild detergent or stone soap 

 

Do thoroughly rinse and dry the surface after washing 

 

Do blot up spills immediately 

Don'ts 

 

Don't use vinegar, lemon juice or other cleaners containing acids. 

 

Don't use cleaners that contain acid such as bathroom cleaners, grout cleaners or tub & tile cleaners. 

 

Don't use abrasive cleaners such as dry cleansers or soft cleansers. 

 

Don't mix bleach and ammonia; this combination creates a toxic and lethal gas. 

Scratches and Chips 

Small scratches are visible because they are lighter in color than the surrounding areas. Making them darker will 
hide them. On dark stones, we have had good success using permanent black magic markers. Do not use them 
on lighter stones. Apply the marker to the scratch, let it dry, and then rub it off the surrounding area. 
Both marble and granite may chip when subjected to a sudden impact. If you have a large chip, try to find the 
loose pieces. They can often be epoxied back into place. The chip can also be filled with colored epoxy to 
match the surrounding stone. Repairing this kind of damage should be left to other knowledgeable 
professionals.  

Tile 

If spillage occurs, then clean up as soon as possible. 

Care 

 

Protect against chipping by using a cutting board.  

 

Protect against scratches, especially on natural stone tiles.  

 

Avoid hard blows that can chip the tile.  

 

Standing water or other liquids can deteriorate tile and grout, and should always be removed. 

Cleaning 

Wash with detergent solution, and rinse. To clean dingy grout, occasionally apply a solution of chlorine bleach 
and water to stand not more than 5 minutes; rinse thoroughly and wipe dry. General-purpose household cleaners 
may also be used if label says can be used on ceramic tile; follow directions exactly. NEVER use scouring 
powders or other abrasives as they will scratch the finish. 

Summary of Contents for 2005 Spa

































































Reviews: