CAKEWALK UA-1G, Owner'S Manual, Page: 20 / 64

20
Driver installation and settings
Steps to be performed on the UA-1G itself are marked by a symbol.
Do not connect the UA-1G to your computer until you are directed to do so.
1.
Start up Windows without the UA-1G connected.
* Disconnect all USB cables other than those for a USB keyboard and/or USB mouse (if used).
2.
Close all currently running software.
3.
Insert the included “UA-1G CD-ROM” into your CD-ROM drive.
4.
In the CD-ROM , navigate to the Driver
➝
XP folder, and double-click the Setup icon.
* If the “Install Program As Other user” dialog box appears, click [Cancel] to terminate the
installation, log on to Windows using an administrator account, and perform the
installation once again.
5.
The screen will indicate “UA-1G Driver will be installed on your computer.” Click
[Next] .
* If any other message appears, proceed as directed by the message.
Windows XP users
Installing the driver
Operation of the UA-1G
UA-1G_e.book 20 ページ ２００８年１２月１０日 水曜日 午後２時５０分