CAKEWALK sonar x3, Reference Manual

Page: 529 / 2094

529
Using tools to perform common tasks
Tools
Working with automation envelopes
To select automation
1. Set the track’s Edit Filter control to the desired automation parameter ( Track Automation or
Clip Automation ).
2. Do one of the following:
• With the Smart tool or Select tool , drag left/right to make a time selection.
• With the Smart tool or Select tool , drag with the right mouse button to lasso select.
• With the Select tool , click the node. Hold CTRL or SHIFT to extend the selection.
• With the Edit tool , click the node.
To move automation
1. Set the track’s Edit Filter control to the desired automation parameter ( Track Automation or
Clip Automation ).
2. Do one of the following:
• With the Move tool , position the pointer over the envelope segment you want to move,
then drag the segment to the desired location.
• With the Edit tool , position the pointer over the envelope segment you want to move, then
drag the segment to the desired location.
To move envelope nodes
1. Set the track’s Edit Filter control to the desired automation parameter ( Track Automation or
Clip Automation ).
2. Do one of the following:
• With the Smart tool , drag the node to the desired location.
• With the Move tool , drag the node to the desired location.
• With the Edit tool , drag the node to the desired location.
When dragging an envelope node, the tooltip shows the current value and the delta value for the
change.