CAKEWALK sonar x3, Reference Manual

Page: 344 / 2094

344
Arranging and editing
Arranging clips
To hide clip headers and maximize clip waveform display
To globally hide the clip headers, click the Track view View menu, point to Display , and select
Maximize Waveform Height . When this options is enabled, the waveform display spans the full
height of clips.
To zoom horizontally
Do one of the following:
• Click the horizontal zoom buttons to zoom in or out by a fixed percentage each time you click.
• Drag the horizontal zoom fader to zoom in or out by the amount you drag.
• Hold down the CTRL key and press the right arrow key (to zoom in) or the LEFT ARROW key (to
zoom out).
n/a The clip is a Region FX clip, which lets you perform
pitch correction on notes and phrases, edit formants,
and add vibrato to monophonic sounds. For details,
see
“Using Region FX” on page 1043.
n/a The clip has been stretched from its original duration
by the displayed percentage value. For details, see
“Slip-stretching audio” on page 687.
n/a The clip follows the global project tempo. For details,
see
“To sync an audio clip to the project tempo” on
page 657 and “AudioSnap section” on page 598.
n/a Double-click the clip to open the Piano Roll view. For
details, see
“The Piano Roll view” on page 724.
n/a Double-click the clip to open the Step Sequencer
view. For details, see
“Step Sequencer view” on
page 1937.
n/a Double-click the clip to open the Staff view. For
details, see
“The Staff view” on page 1180.
n/a Double-click the clip to open the Event List view. For
details, see
“The Event List view” on page 788.
Audio clip MIDI clip Description
Table 45. Clip header indicators (Continued)