CAKEWALK sonar x3, Reference Manual

Page: 279 / 2094

279
Preparing to record
Recording
Choosing an input
To record into a track, you must choose an input for the music or sound to be recorded. Usually, you
choose
All Inputs - Omni to record material from a MIDI instrument, or the left or right channel of a
digital audio device (such as a sound card) to record audio material, or stereo if you want to record
stereo audio in a single track. The input for each track is displayed in the track’s
Input field and at
the top of each module in the Console view.
When you choose
All Inputs > Omni as the input for a track, SONAR merges material from all MIDI
inputs and instruments. This means you don’t have to worry about input, channel, or other MIDI
settings. Sometimes, you may want to record different MIDI channels into different tracks. To learn
how to do this, see
“Recording specific ports and channels” on page 316.
While each track can have a different input, it is also possible for several tracks to have the same
input.
To choose a MIDI input in the Track view
1. Click the drop-down arrow of an Input field of a MIDI track.
A drop-down menu of MIDI inputs appears.
2. Choose an input from the following:
•
None. This option actually sets the Input field to Omni with this setting the track will record
any MIDI input coming in on any enabled port (MIDI interface input driver) on any channel.
• All Inputs > (MIDI Omni or MIDI ch 1-16). With this setting the track will record any MIDI
input coming in on any enabled port (MIDI interface input driver) on any channel, unless you
choose a particular MIDI channel instead of MIDI Omni. Then the track will only record input
that’s on the MIDI channel you chose.
• (name of MIDI input driver) > (MIDI Omni or MIDI ch 1-16). Choosing this option causes
the track to record any MIDI channel coming from the named MIDI interface input driver,
unless you choose a particular MIDI channel instead of MIDI Omni. Then the track will only
record input that’s on the MIDI channel you chose, from the named input driver.
• Preset. If you want to record multiple data from multiple ports and/or channels, you need to
select a preset collection of those ports and channels. You can select one here (to create
presets, see next line).
• Manage Presets. If you want to create or edit any preset collections of input ports and
channels, you can select this option (see “To create or edit a preset input configuration” on
page 317).